Ocean International
Nikol, Ahmedabad, Gujarat
GST No. 24AAEFO6278J1ZX
Call 08048976753 80% Response Rate
Blown Film Plant
Introduction
Blown film extrusion is a technology that is the most common method to make plasticfilms, especially for the packaging industry. The process involves extruding a tube of molten polumerthrough a die and inflating to several times its initial diameter to form a thin film bubble. This bubble is then collapsed and used as a lay-flat film or can be made into bags. Usually polyethyleneis used with this process, and other materials can be used as blends with these polymers. A diagram of a blowing film process.
Advantages
Blown film generally has a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.
Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.
Applications
Consumer food wrap from plastic wraparticle.
Agriculturalfilm
Bags
Industry packaging, shrink film , stretch film
Consumer packaging, food wrap, transport packaging ( Figure)
Laminatingfilm
Barrier film
Multilayer film
Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube andnanowire films.
Blown Film Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Brand | OCEAN INTERNATIONAL |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Capacity | 28 - 280 ( kg/hr ) |
| Driven Type | Electrical |
| Lay Flat Width | 300 - 600 to 1600 - 2500 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Color | BLUE / WHITE |
| Model | oiMOno2 |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Range Of Thickness Of Wall Ceiling Panels | 100 ( Micro ) |
Blown Film Plant
Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Introduction of Blown Film Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Application of Blown Film Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
L
iners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Key Word for Blown Film Plant:-
Blown Film Plant
Blown Film Plant India
Blown Film Plant in Ahmedabad
Blown Film Plant Manufacturer
Blown Film Machinery
Blown Film Machine
Blown Film Line
Blown Film Plant Unit
Blown Film Plant Exporter
Blown Film Plant Manufacturer and Exporter
Blown Film Plant Manufacturer Ocean International
Teg for Blown Film Plant
#blownfilmplant #blown #film #plant #blownfilm #filmplant #blownfilmplantindia #blownfilmplantinahmedabad #blownfilmplantmanufacturer #blownfilmplantunit #blownfilmplantexporter #blownfilmplantmachinery #blownfilmplantline #blownfilmplantmachine #blownfilmplantmanufacturerandexporter
Web Site:-
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Item Code: oiMono2
- Port of Dispatch: Mundra, Gujarat
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Days
View Complete details
Blown Film Plant Unit
Minimum Order Quantity: 1 Unit
Product Brochure
| Material to be Extruded | Plastic |
| Capacity | 28 - 280 ( kg/hr ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Automatic Grade | Automatic |
| Voltage | 146 - 194 ( kw ) |
| Maintenance | No Maintenance |
| Output | 28 - 280 ( kg/hr ) |
| Machine Power | 146 - 194 ( kw ) |
| Body Material | MS |
| Phase | 3 |
| Color | BLUE / WHITE |
| Line Speed | 80 mpm |
| Thickness | 100 ( Micron ) |
| Weight | 3 Ton |
| Warranty | 1 Year |
| Installation Services | Yeas |
| Lay Flat Width | 300 - 600 to 1600 - 2500 ( MM ) |
| I deal in | New Only |
| Brand | OCEAN INTERNATIONAL |
| Plastic Processed | EXTRUDER |
| Power Consumption | 146 - 194 ( kw ) |
Blown Film Plant Unit
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Introduction of Blown Film Plant Unit:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Application of Blown Film Plant Unit:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Key Word for Blown Film Plant Unit:-
Blown Film Plant Unit
Blown Film Plant Unit India
Blown Film Plant Unit in Ahmedabad
Blown Film Plant Unit Manufacturer
Blown Film Plant Machinery
Blown Film Plant Machine
Blown Film Plant Line
Blown Film Plant Unit Exporter
Blown Film Plant Unit Manufacturer and Exporter
Blown Film Plant Unit Manufacturer Ocean International
#Blown #Film #Plant #Unit
Tag for Blown Film Plant Unit:-
#blownfilmplantunit #blown #film #plant #unit #blownfilm #filmplant #plantunit #blownfilmplant #filmplantunit #blownfilmplantunit #blownfilmplantunitindia #blownfilmplantunitinahmedabad #blownfilmplantunitmanufacturer #blownfilmplantunitexporter #blownfilmplantmachinery #blownfilmplantmachine #blownfilmplantline #blownfilmplantunitmanufacturerandexporter #blownfilmplantmanufactureroceaninternational
#oceaninternational #ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Item Code: oiMono1
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Days
View Complete details
Biodegradable Film Making Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Type | Automatic |
| Material to be Extruded | Plastic |
| Capacity | 28 - 280 ( kg/hr ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Automatic Grade | Automatic |
| Voltage | 146 - 194 ( kw ) |
| Output | 28 - 280 ( kg/hr ) |
| Maintenance | N' |
| Machine Power | 146 - 194 ( kw ) |
| Body Material | MS |
| Phase | 3 |
| Color | BLUE / WHITE |
| Thickness | 100 ( Micron ) |
| Weight | 3 Ton |
| Warranty | 1 Year |
| Lay Flat Width | 300 - 600 to 1600 - 2500 ( mm ) |
| I deal in | New Only |
| Brand | OCEAN INTERNATIONAL |
| Plastic Processed | EXTRUDER |
| Power Consumption | 75 ( kw ) |
Biodegradable Film Making Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Biodegradable Film Making Plant
Introduction of Biodegradable Film Making Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Biodegradable Film Making Plant
Application of Biodegradable Film Making Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Key Word for Biodegradable Film Making Plant:-
Biodegradable Film Making Plant
Biodegradable Film Making Plant India
Biodegradable Film Making Plant in Ahmedabad
Biodegradable Film Making Plant Manufacturer
Biodegradable Film Making Plant Unit
Biodegradable Film Making Plant Exporter
Biodegradable Film Making Plant Machinery
Biodegradable Film Making Plant Machine
Biodegradable Film Making Plant Line
Biodegradable Film Making Plant Manufacturer and Exporter
Biodegradable Film Making Plant Manufacturer ocean International
Teg for Biodegradable Film Making Plant
#biodegradableblownfilmmakingplant #biodegradable #blown #film #making #plant #biodegradableblown #blownfilm #filmmaking #makingplant #biodegradableblownfilm #blownfilmmakking #filmmakingplant #biodegradableblownfilmmaking #blownfilmmakingplant #biodegradableblownfilmplant #blownfilmplant #biodegradableblownfilmmakingplantindia #biodegradableblownfilmmakingplantindia #biodegradableblownfilmmakingplantinahmedabad
#biodegradableblownfilmmakingplantmanufacturer #biodegradableblownfilmmakingplantunit #biodegradableblownfilmmakingplantexporter #biodegradableblownfilmmakingplantmanufacturerandexporter #biodegradableblownfilmmakingplantmannufactureroceaninternational
#biodegradableblownfilmmakingplantmachinery #biodegradableblownfilmmakingplantmachine #biodegradableblownfilmmakingplantline #ocean #international #oceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Days
View Complete details
Single Layer Blown Film Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Material to be Extruded | Plastic |
| Capacity | 28 - 280 ( kg/hr ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Automatic Grade | Automatic |
| Maintenance | No Maintenance |
| Output | 28 - 280 |
| Voltage | 146 - 194 ( kw ) |
| Machine Power | 146 - 194 ( kw ) |
| Body Material | MS |
| Phase | 3 |
| Color | BLUE / WHITE |
| Thickness | 100 ( Micron ) |
| Weight | 3 Ton |
| Warranty | 1 Year |
| Installation Services | Yes |
| Lay Flat Width | 300 - 600 to 1600 - 2500 ( MM ) |
| I deal in | New Only |
| Brand | Ocean International |
| Plastic Processed | EXTRUDER |
| Power Consumption | 75 ( kw ) |
Single Layer Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Introduction of Single Layer Blown Film Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Single Layer Blown Film Plant
Application of Single Layer Blown Film Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Key Word for Single Layer Blown Film Plant:-
Single Layer Blown Film Plant
Single Layer Blown Film Plant India
Single Layer Blown Film Plant in Ahmedabad
Single Layer Blown Film Plant Manufacturer
Single Layer Blown Film Plant Unit
Single Layer Blown Film Plant Exporter
Single Layer Blown Film Plant Machinery
Single Layer Blown Film Plant Machine
Single Layer Blown Film Plant Line
Single Layer Blown Film Plant Manufacturer and Exporter
Single Layer Blown Film Plant Manufacturer Ocean International
Tag for Single Layer Blown Film Plant:-
#singlelayerblownfilmplant #single #layer #blown #film #plant #singlelayer #layerblown #blownfilm #filmplant #singlelayerblown #layerblownfilm #blownfilmplant #singlelayerblownfilm #layerblownfilmplant #singlelayerblownfilmplantindia #singlelayerblownfilmplantinahmedabad #singlelayerblownfilmplantmanufacturer #singlelayerblownfilmplantunit #singlelayerblownfilmplantexporter #singlelayerblownfilmplantmachinery #singlelayerblownfilmplantmachine #singlelayerblownfilmplantline #singlelayerblownfilmplantmanufacturerandexporter #singlelayerblownfilmplantmanufactureroceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Days
View Complete details
Monolayer Blown Film Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Material to be Extruded | Plastic |
| Capacity | 28 - 280 ( kg/hr ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Automatic Grade | Automatic |
| Maintenance | No Maintenance |
| Voltage | LD,HM,BIODEGRADABLE |
| Output | 28 - 280 ( kg/hr ) |
| Machine Power | 146 - 194 ( kw ) |
| Body Material | MS |
| Phase | 3 |
| Color | BLUE / WHITE |
| Thickness | 100 ( Micron ) |
| Weight | 3 Ton |
| Warranty | 1 Year |
| Installation Services | Yes |
| Lay Flat Width | 300 - 600 to 1600 - 2500 ( mm ) |
| I deal in | New Only |
| Brand | OCEAN INTERNATIONAL |
| Plastic Processed | EXTRUDER |
| Power Consumption | 75 ( kw ) |
Monolayer Blown Film Plant
Monolayer Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Introduction of Monolayer Blown Film Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Application of Monolayer Blown Film Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Key Word for Monolayer Blown Film Plant:-
Monolayer Blown Film Plant
Monolayer Blown Film Plant India
Monolayer Blown Film Plant in Ahmedabad
Monolayer Blown Film Plant Manufacturer
Monolayer Blown Film Plant Machinery
Monolayer Blown Film Plant Machine
Monolayer Blown Film Plant Line
Monolayer Blown Film Plant Unit
Monolayer Blown Film Plant Exporter
Monolayer Blown Film Plant Manufacturer and Exporter
Monolayer Blown Film Plant Manufacturer Ocean International
Monolayer Blown Film Plant
Tag for Monolayer Blown Film Plant
#monolayerblownfilmplant #monolayer #blown #film #plant #monolayerblown #blownfilm #filmplant #monolayerblownfilm #blownfilmplant #monolayerblownfilmplantindia #monolayerblownfilmplantinahmedabad #monolayerblownfilmplantunit #monolayerblownfilmplantexporter #monolayerblownfilmplantmanufacturer #monolayerblownfilmplantmachinery #monolayerblownfilmplantmachine #monolayerblownfilmplantline #monolayerblownfilmplantmanufacturerandexporter #monolayerblownfilmplantmanufactureroceaninternational #ocean #international #oceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Days
View Complete details
Blown Film Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Capacity | 28 - 280 ( kg/hr ) |
| Brand | Ocean International |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Machine Type | Automatic |
| Driven Type | Electrical |
| Lay Flat Width | 300 - 600 to 1600 - 2500 |
| Color | Blue / White |
| Voltage | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Range Of Thickness Of Wall Ceiling Panels | 100 ( Micro ) |
Blown Film Machine
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Blown Film Machine
Introduction of Blown Film Machine:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Machine
Application of Blown Film Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Blown Film Machine:-
Blown Film Machine
Blown Film Machine India
Blown Film Machine in Ahmedabad
Blown Film Machine Manufacturer
Blown Film Machine Unit
Blown Film Machine Exporter
Blown Film Machine Machinery
Blown Film Machine Plant
Blown Film Machine Line
Blown Film Machine Manufacturer and Exporter
Blown Film Machine Manufacturer Ocean International
Teg for Blown Film Machine:-
#blownfilmmachine #blown #film #machine #blownfilm #filmmachine #blownfilmmachineindia #blownmachine #blownfilmmachineinahmedabad #blownfilmmachinemanufacturer #blownfilmmachinunit #blownfilmmachineexporter #blownfilmmachinemachinery #blownfilmmachineplant #blownfilmmachineline #blownfilmmachinemanufacturerandexporter #blownfilmmachinemanufactureroceaninternational
#ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Item Code: oiMono3
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 ( Days )
View Complete details
Blown Film Plant In India
Minimum Order Quantity: 1 Unit
Product Brochure
| Brand | OCEAN INTERNATIONAL |
| Production Capacity | 28 - 280 ( KG/HR ) |
| Power Consumption | 146 - 194 ( kw ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Color | BLUE / WHITE |
| Plastic Processed | EXTRUDER |
| Maintenance | No Maintenance |
Blown Film Plant In India
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Introduction:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Plant In India
Application of Blown Film Plant In India:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Blown Film Plant In India:-
Blown Film Plant In India
Blown Film Plant
Blown Film Plant In India
Blown Film Plant In Ahmedabad
Blown Film Plant Manufacturer
Blown Film Plant Exporter
Blown Film Plant Unit
Blown Film Plant Machinery
Blown Film Plant Machine
Blown Film Plant Line
Blown Film Plant Manufacturer and Exporter
Blown Film Plant Manufacturer Ocean International
Teg for Blown Film Plant In India:-
#blownfilmplantinindia #blown #film #plant #in #india #blownfilm #filmplant #plantin #inindia #blownfilmplant #filmplantin #plantinindia #blownfilmplantin #filmplantinindia #blownfilmplantindia #blownfilmplantinahmedabad #blownfilmplantmanufacturer #blownfilmplantmachinery #blownfilmplantmachine #blownfilmplantline #blownfilmplantexporter #blownfilmplantunit #blownfilmplantmanufacturerandexporter #blownfilmplantmanufactureroceaninternational #ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 28 - 280 ( KG/HR ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Power Consumption | 146 - 194 ( kw ) |
| Brand | Ocean International |
| Color | Blue / White |
| Material | LD/ PP/ HM/ Biodegradable |
| Automation Grade | Automatic |
| Plastic Processed | Extruder |
| Lay Flat Width Range | 300 - 600 to 1600 - 2500 ( mm ) |
| Maintenance | No Maintenance |
| Layer | Singallayer |
| I deal in | New Only |
| Body Material | MS |
| Phase | 3 |
| Power Source | ELECTRIC |
| Voltage | 146 - 280 ( kw ) |
Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Blown Film Plant
Introduction of Blown Film Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Plant
Application of Blown Film Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Blown Film Plant:-
Blown Film Plant
Blown Film Plant India
Blown Film Plant in Ahmedabad
Blown Film Plant Manufacturer
Blown Film Plant Exporter
Blown Film Plant Unit
Blown Film Plant Machinery
Blown Film Plant Machine
Blown Film Plant Line
Blown Film Plant Manufacturer and Exporter
Blown Film Plant Manufacturer Ocean Internationa
Teg for Blown Film Plant:-
#blownfilmplant #blown #fiilm #plant #blownfilm #filmplant #blownplant #blownfilmplantindia #blownfilmplantinahmedabad #blownfilmplantmanufacturer #blownfilmplantexportre #blownfilmplantunit #blownfilmplantmanufacturerandexporter #blownfilmplantmanufactureroceaninternational #blownfilmplantmachinery #blownfilmmachine #blownfilmplantline #blownfilmplantmachinerymachine #ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
- Port of Dispatch: Mundra, Gujarat
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Brand | Ocean International |
| Material to be Extruded | Plastic |
| Capacity | 28 - 280 ( kg/hr ) |
| Machine Type | Automatic |
| Production Capacity | 28 - 280 ( KG/HR ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Power Source | Electric |
| Material | LD,HM,BIODEGRADABLE |
| Automatic Grade | Automatic |
| Lay Flat Width Range | 300 - 600 to 1600 - 2500 ( mm ) |
| Output | 300-350 kg/hr |
| Maintenance | No Maintenance |
| Machine Power | 145 kw |
| Body Material | ms |
| Phase | 3 |
| Voltage | 145 kw |
| Color | Blue/ White |
| Line Speed | 80 mpm |
| Thickness | 100 ( Micron ) |
| Weight | 3 Ton |
| Warranty | 1 Year |
| Film Thickness | 100 ( Micron ) |
| Screw Diameter | 45 ( mm ) |
| Installation Services | Yes |
| I deal in | New Only |
| Plastic Processed | EXTRUDER |
| Power Consumption | 146 - 194 ( kw ) |
Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Blown Film Plant
Introduction of Blown Film Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Plant
Application of Blown Film Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Blown Film Plant:-
Blown Film Plant
Blown Film Plant India
Blown Film Plant in Ahmedabad
Blown Film Plant Manufacturer
Blown Film Plant Unit
Blown Film Plant Exporter
Blown Film Plant Machinery
Blown Film Plant Machine
Blown Film Plant Line
Blown Film Plant Manufacturer and Exporter
Blown Film Plant Manufacturer Ocean International
Teg for Blown Film Plant:-
#blownfilmplant #blownfilm #filmplant #blown #film #plant #blownfilmplant india #blownfilmplantinahmedabad #blownfilmplantmanufacturer #blownfilmplantmachinery #blownfilmplantmachine #blownfilmplantline #blownfilmplantunit #blownfilmplantexporter #blownfilmplantmanufacturerandexporter #blownfilmplantmanufactureroceaninternational
#ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 80 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Making Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Capacity | 145 ( kg/hr ) |
| Brand | Ocean International |
| Power Consumption | 145 ( kw ) |
| Material | PP |
| Production Capacity | 28 - 280 ( KG/HR ) |
| Machine Type | Automatic |
| Output | 28 - 280 ( kg/hr ) |
| Operation Mode | Automatic |
| Phase | 3 |
| Voltage | 146 - 194 ( kw ) |
| Power Source | Electric |
| Color | Blue / White |
| Machine Power | 146 - 194 ( kw ) |
| Weight | 3 Ton |
| Size | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Thickness | 100 ( Micron ) |
| I deal in | New Only |
Blown Film Making Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Blown Film Making Plant
Introduction of Blown Film Making Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Making Plant
Application of Blown Film Making Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Blown Film Making Plant:-
Blown Film Making Plant
Blown Film Making Plant India
Blown Film Making Plant in Ahmedabad
Blown Film Making Plant Manufacturer
Blown Film Making Plant Unit
Blown Film Making Plant Exporter
Blown Film Making Plant Machinery
Blown Film Making Plant Machine
Blown Film Making Plant Line
Blown Film Making Plant Unit
Blown Film Making Plant Exporter
Blown Film Making Plant Manufacturer and Exporter
Blown Film Making Plant Manufacturer Ocean International
#Blown #Film #Making #Plant
Tag for Blown Film Making Plant
#blownfilmmakingplant #blown #film #making #plant #blownfilm #filmmaking #makingplant #blownfilmmaking #filmmakingplant #blownfilmmakingplantindia #blownfilmplant #blownfilmmakingplantinahmedabad #blownfilmmakingplantmanufacturer #blownfilmmakingplantunit #blownfilmmakingplantexporter #blownfilmmakingplantmanufacturerandexporter #blownfilmmakingplantmachinery #blownfilmmakingplantmachine #blownfilmmakingline #blownfilmmakingplantmanufactureroceaninternational
#ocean #international #oceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 80 - 250 ( kg/hr )
- Delivery Time: 90 Days
View Complete details
Blown Film Plant Cost
Minimum Order Quantity: 1 Unit
Product Brochure
| Material to be Extruded | Plastic |
| Material | LD, HM, BIODEGRADABLE |
| Brand | Ocean International |
| Power Consumption | 20 - 40 ( kw ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Capacity | 28 - 280 ( kg/hr ) |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Driven Type | Electrical |
| Power Source | Electric |
| Color | BLUE / WHITE |
| Automation Grade | Automatic |
| Plastic Processed | EXTRUDER |
| Lay Flat Width Range | 300 - 600 to 1600 - 2500 ( mm ) |
| Maintenance | No Maintenance |
| Voltage | 146 - 194 ( kw ) |
| Machine Power | 146 - 194 ( kw ) |
| Body Material | MS |
| Total Connected Load Hp Approx | 25 - 91 ( kw ) |
| Film Thickness | 100 ( Micron ) |
| Screw Diameter | 45 ( mm ) |
| I deal in | New Only |
Blown Film Plant Cost
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Blown Film Plant Cost
Introduction of Blown Film Plant Cost:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Plant Cost
Application of Blown Film Plant Cost:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Blown Film Plant Cost:-
Blown Film Plant Cost
Blown Film Plant Cost
Blown Film Plant Cost India
Blown Film Plant Cost in Ahmedabad
Blown Film Plant Cost Manufacturer
Blown Film Plant Cost Exporter
Blown Film Plant Cost Unit
Blown Film Plant Cost Machinery
Blown Film Plant Cost Machine
Blown Film Plant Cost Line
Blown Film Plant
Blown Film Plant Cost Manufacturer and Exporter
Blown Film Plant Cost Manufacturer Ocean international
Teg for Blown Film Plant Cost:-
#blownfilmplantcost #blown #film #plant #cost #blownfilm #filmplant #plantcost #blownfilmplant #filmplantcost #blownfilmplantcostindia #blownfilmplantcostinahmedabad #blownfilmplantcostmanufacturer #blownfilmplantcostexporter #blownfilmplantcostunit #blownfilmplantcostmanufacturerandexporter #blownfilmplantmanufactureroceaninternational #blownfilmplantmachinery #blownfilmplantmachine #blownfilmplantline #blownfilmplantsupplier
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Biodegradable Blown Film Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Machine Type | Automatic |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Brand | OCEAN INTERNATIONAL |
| Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 75 KW |
| Color | BLUE / WHITE |
Biodegradable Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Biodegradable Blown Film Plant
Introduction of Biodegradable Blown Film Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Biodegradable Blown Film Plant
Application of Biodegradable Blown Film Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Biodegradable Blown Film Plant:-
Biodegradable Blown Film Plant
Biodegradable Blown Film Plant India
Biodegradable Blown Film Plant in Ahmedabad
Biodegradable Blown Film Plant Manufacturer
Biodegradable Blown Film Plant Exporter
Biodegradable Blown Film Plant Unit
Biodegradable Blown Film Plant Machinery
Biodegradable Blown Film Plant Machine
Biodegradable Blown Film Plant Line
Biodegradable Blown Film Plant Manufacturer and Exporter
Biodegradable Blown Film Plant Manufacturer Ocean International
Biodegradable Blown Film Plant Supplier
Teg for Biodegradable Blown Film Plant:-
#biodegradableblownfilmplant #biodegradable #blown #film #plant #biodegradableblown #blownfilm #filmplant #biodegradableblownfilm #blownfilmplant #biodegradableblownfilmplantindia #biodegradableblownfilmplantinahmedabad #biodegradableblownfilmplantmanufacturer #biodegradableblownfilmplantmanufacturerandexporter #biodegradableblownfilmplantmanufactureroceaninternational
#ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Brand | OCEAN INTERNATIONAL |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Capacity | 28 - 280 ( kg/hr ) |
| Driven Type | Electrical |
| Lay Flat Width | 300 - 600 to 1600 - 2500 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Color | Blue / White |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Blown Film Plant
Introduction of Blown Film Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Plant
Application of Blown Film Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Blown Film Plant:-
Blown Film Plant
Blown Film Plant India
Blown Film Plant in Ahmedabad
Blown Film Plant Manufacturer
Blown Film Plant Unit
Blown Film Plant Exporter
Blown Film Plant Machinery
Blown Film Plant Machine
Blown Film Plant Line
Blown Film Plant Manufacturer and Exporter
Blown Film Plant Manufacturer Ocean International
Teg for Blown Film Plant:-
#blownfilmplant #blownfilm #filmplant #blown #film #plant #blownfilmplant india #blownfilmplantinahmedabad #blownfilmplantmanufacturer #blownfilmplantmachinery #blownfilmplantmachine #blownfilmplantline #blownfilmplantunit #blownfilmplantexporter #blownfilmplantmanufacturerandexporter #blownfilmplantmanufactureroceaninternational
#ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Monolayer Blown Film Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Type | Monolayer Blown Film Plant |
| Brand | Ocean International |
| Material to be Extruded | Plastic |
| Capacity | 28 - 280 ( kg/hr ) |
| Machine Type | Automatic |
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Color | BLUE WHITE |
| Automatic Grade | Automatic |
| Output | 28 - 280 ( kg/hr ) |
| Maintenance | No Maintenance |
| Machine Power | 146 - 194 ( kw ) |
| Body Material | MS |
| Voltage | 146 - 194 ( kw ) |
| Weight | 3 Ton |
| Warranty | 1 Year |
| Installation Services | Yes |
| Lay Flat Width | 300 - 600 to 1600 - 2500 ( mm ) |
| I deal in | New Only |
| Plastic Processed | EXTRUDER |
| Power Consumption | 146 - 194 ( kw ) |
Monolayer Blown Film Machine:-
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Monolayer Blown Film Machine
Introduction of Monolayer Blown Film Machine:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Monolayer Blown Film Machine
Application of Monolayer Blown Film Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Monolayer Blown Film Machine:-
Monolayer Blown Film Machine
Monolayer Blown Film Machine India
Monolayer Blown Film Machine in Ahmedabad
Monolayer Blown Film Machine Manufacturer
Monolayer Blown Film Machine Unit
Monolayer Blown Film Machine Exporter
Monolayer Blown Film Machine Machinery
Monolayer Blown Film Machine Plant
Monolayer Blown Film Machine Line
Monolayer Blown Film Machine Manufacturer and Exporter
Monolayer Blown Film Machine Manufacturer Ocean International
Tag for Monolayer Blown Film Machine:-
#monolayerblownfilmmachine #monolayer #blown #film #machine #monolayerblown #blownfilm #filmmachine #monolayerblownfilm #blownfilmmachine #monolayerblownfilmmachineindia #monolayerblownfilmmachineinahmedabad #monolayerblownfilmmachinemanufacturer #monolayerblownfilmmachineunit #monolayerblownfilmmachineexporter #monolayerblownfilmmachinemanufacturerandexporter #monolayerblownfilmmachinemanufactureroceaninternational #monolayerblownfilmmachinemachinery #monolayerblownfilmmachineplant #monolayerblownfilmmachineline #monolayerblownfilmmachinesupplier #ocean #international
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 WORKING DAYS
View Complete details
Monolayer Blown Film Line
Minimum Order Quantity: 1 Unit
Product Brochure
| Dimensions | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Brand | OCEAN INTERNATIONAL |
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Voltage | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Color | Blue/ White |
| Overall Dimension | 5 X 5 X 5 to 22 X 8 X 12 ( L X W X H ) |
| Weight | 3 Ton |
Monolayer Blown Film Line
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Monolayer Blown Film Line
Introduction of Monolayer Blown Film Line:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Monolayer Blown Film Line
Application of Monolayer Blown Film Line:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for Monolayer Blown Film Line:-
Monolayer Blown Film Line
Monolayer Blown Film Line India
Monolayer Blown Film Line in Ahmedabad
Monolayer Blown Film Line Manufacturer
Monolayer Blown Film Line Unit
Monolayer Blown Film Line Exporter
Monolayer Blown Film Line Machinery
Monolayer Blown Film Line Machine
Monolayer Blown Film Line Plant
Monolayer Blown Film Line Manufacturer and Exporter
Monolayer Blown Film Line Manufacturer Ocean International
teg for Monolayer Blown Film Line:-
#monolayerblownfilmline #monolayer #blown #film #line #monolayerblown #blownfilm #filmline #blownfilmline #monolayerblownfilm #blownfilmline #monolayerblownfilmlineindia #monolayerblownfilmlineinahmedabad #monolayerblownfilmlinemanufacturer #monolayerblownfilmlineunit #monolayerblownfilmlineexporter #monolayerblownfilmlinemanufacturerandexporter #monolayerblownfilmlinemachinery #monolayerblownfilmlineplant #monolayerblownfilmlinemachine #monolayerblownfilmlinemanufacturerandexporter #monolayerblownfilmlinemanufactureroceaninternational
#ocean #international #oceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintennance |
| Country of Origin | Made in India |
Blown Film Machine
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Blown Film Machine
Introduction of Blown Film Machine:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Blown Film Machine
Application of Blown Film Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Blown Film Machine
Blown Film Machine
Blown Film Machine India
Blown Film Machine in Ahmedabad
Blown Film Machine Manufacturer
Blown Film Machine Exporter
Blown Film Machine Unit
Blown Film Machine Machinery
Blown Film Machine Plant
Blown Film Machine Line
Blown Film Machine Manufacturer and Exporter
Blown Film Machine Manufacturer Ocean International
#Blown #Film #Machine
Keyword for Blown Film Machine:-
#blownfilmmachine #blown #film #machine #blownfilm #filmmachine #blownmachine #blownfilmmachineindia #blownfilmmachineinahmedabad #blownfilmmachinemanufacturer #blownfilmmachineexporter #blownfilmmachineunit #blownfilmmachinemanufacturerandexporter #blownfilmmachinemachinery #blownfilmmachineplant #blownfilmmachineline #blownfilmmachinemanufacturerandexporter #ocean #international #oceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Three Layer Blown Film Making Line
Minimum Order Quantity: 1 Unit
Product Brochure
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD,PP,HM,Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
Three Layer Blown Film Making Line. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Three Layer Blown Film Making Line material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of Three Layer Blown Film Making Line:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Three Layer Blown Film Making Line:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Three Layer Blown Film Making Line:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Multilayer Blown Film Machine.
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Three Layer Blown Film Making Line
#threelayerblownfilmmakingline #threelayerblownfilmmakinglineindia #threelayerblownfilmmakinglineinahmedabad
#threelayerblownfilmmakinglinemachine #threelayerblownfilmmakinglineplant #threelayerblownfilmmakinglinemanufacturer #threelayerblownfilmmakinglineunit #threelayerblownfilmmakinglineexporter #theeelayerblownfilmmakinglinemanufacturerandexporter
#three #layer #blown #film #making #line #threelayerblownfilmmaking #layerblownfilmmakingline #blownfilmmakingline
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blowing Film Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kg/hr ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Country of Origin | Made in India |
Blowing Film Making Machine. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Blowing Film Making Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Blowing Film Making Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc.
Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Blowing Film Making Machine can also be produced with this machine.
Features of Blowing Film Making Machine:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Blowing Film Making Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Blowing Film Making Machine:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359°.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Blowing Film Making Machine.
Blowing Film Making Machine
#blowingfilmmakingmachine #blowingfilmmaking #filmmakingmachine #blowing #film #making #machine #blowingfilm #filmmaking #makingmachine #blowingfilmmakingmachineindia #blowingfilmmakingmachineinahmedabad #blowingfilmmakingmachinemanufacturer #blowingfilmmakingmachinesupplier #blowingfilmmakingmachineexporter #blowingfilmmakingmachineplant #blowingfilmmakingmachineline #blowingfilmmakingmachineunit #blowingfilmmakingmachinemachinery #blowingfilmmakingmachinemachinery
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Plant Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Blown Film Plant
Blown Film Plant gives high output up to 280 kg/hr with thickness ranging from 8 microns to 150 microns and a maximum film width of 2500 mm. Mono layer blown film plant is a cost effective investment of producing single layer barrier films and mono layer blown film lines as well. For packaging industries that requires greater productivity in low investment and low power consumption, monolayer blown film machine is the right option as this equipment offers high speed production solution. It is an effective investment solution for packaging sector as they can get back good return on what they spend.
The manufacture of Blown Film Plant for products such as?shopping bags?and continuous sheeting is achieved using a?blown film?line. This process is the same as a regular extrusion process up until the die. There are three main types of dies used in this process: annular (or crosshead), spider, and spiral. Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow. Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.
Blown Film Plant & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean extrusions is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
Singal Layer Blown Film Plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.
Blown Film Plant, Mono Layer Blown Film Machine, blown film machine, Blown Film Machine, blown film machine, Mono Layer blown Film Plant, mono layer blown film plant, mono layer, Mono Layer, Mono Layer Machine, mono layer machine, Film blowing Machine, film blowing machine, ocean, extrusions, Ocean Extrusions mono layer, Extrusions Mono layer, Mono Layer Blown Film Machine, Extrusions mono layer blown film machine, Ocean Extrusions mono layer plant, Extrusions Mono Layer plants.
Blown Film Plant Machine
#blowfilmplantmachhine #blown #film #plant #machine #blownfilm #filmplant #plantmachine #blownfilmplant #filmplantmachine #blownfilmplantmachineindia #blownfilmplantmachineinahmedabda #blownfilmplantmachhinemanufacturer #blownfilmplantmachineexporter #blownfilmplantmachineunit #blownfilmplantmachinesupplier #blownfilmplantmachinemanufacturerandexporter
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Line
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | Nn Maintenance |
| Country of Origin | Made in India |
#oceaninternational
Blown Film Line
Two layer blown film extrusion machine
Three layer blown film machine
2 layer blown machine
3 layer film machine
Blown film machinery
Monolayer blown film machine
Multilayer blown film machine
A-B-A blown film machine
Co extrusion blown film machine
#blownfilmline #blownfilmlineinahmedabad #blownfilmmachine #blownfilmplant #blownfilmlineindia #blownfilmlinemanufacturer #blowingfilmline #blownfilmextrusionline #monolayerblownfilmline #twolayerblownfilmline #threelayerblownfilmline #multilayerblownfilmline
Annular dies are the simplest, and rely on the polymer melt channeling around the entire cross section of the die before exiting the die; this can result in uneven flow.
Blown Film Line
Spider dies consist of a central mandrel attached to the outer die ring via a number of "legs"; while flow is more symmetrical than in annular dies, a number of weld lines are produced which weaken the film. Spiral dies remove the issue of weld lines and asymmetrical flow, but are by far the most complex.
Blown Film Line Mono & Multi Layer Cast Film Extrusion Lines Blown Film Line LLDPE Mono-Layer Blown Film Extrusion Mono & MultiLayer Cast Film Extrusion Lines Blown Film Extrusion Line Monolayer Blown Film Plant, Monolayer Extrusion Machine HDPE box strapping line, PET box strapping line and plastic reprocessing plant. Ocean International is a well known trusted name for providing customized solutions of plastic extrusion machinery. ABA Multi layer Blown Film Machine Layer Film Line
blown film plant, blown film extruder, blown film extrusion machine and monolayer blown film extrusion line for plastic film, tubing and bags blown film plant multilayer film line pp blown film machine multilayer extrusion film line PE Blown film machine Plastic processing machinery Multilayer co-extrusion blown film machine PE Blown film machine, Plastic processing machinery, Multilayer.
Blown Film Line, Mono Layer Blown Film Machine, Blown Film Machine, Blown Film Line, Blown Film Machine, Blown Film Machine, Mono Layer Blown Film Plant, Mono Layer Blown Film Plant, Mono Layer, Mono Layer, Mono Layer Machine, Mono Layer Machine, Film Blowing Machine film blowing:
There are different types like multilayer, mono layer, stripe on film etc in different gauges and sizes and in different material like:
- PVC rigid
- PVC flexible
- HM
- LLDPE
- HDPE
- PP etc
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Blown Film Line
#blownfilmline #blownfilm #filmline #blownfilmlineindia #blownfilmlineinahmedabad #blownfilmlinemachine #blownfilmlinemanufacturer #blownfilmlineplant #blownfilmlinemachinery #blownfilmlineexporter #blownfilmlineunit #blownfilmlinemanufacturerandexporter
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Line
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Blown Film Line. The offered Blown Film Plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Blown Film Line are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Blown Film Line material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of Blown Film Line:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Blown Film Line:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Blown Film Line:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359°.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Multilayer Blown Film Machine.
Ocean International
Extrusions Machinery
#extrusions machinery
#extrusions #machinery
Blown Film Line
#blown film line #blownfilm #filmline #blownfilmlineindia #blown filmline machinery #blownfilmlinemachine #blown filmlineplant #blownfilmlineindia #blownfilmlinemachinery #blownfilmlinemanufacturer #blownfilmlineexporter #blownfilmlineunit #blownfilmlinemanufacturerandexporter #blownfilmlinesupplier
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blown Film Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Country of Origin | Made in India |
Blown Film Machine. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Blown Film Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of Blown Film Machine:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Blown Film Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Blown Film Machine:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359°.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Multilayer Blown Film Machine.
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Blown Film Machine
#blownfilmmachine #blown #film #machine #blownfilm #filmmachine #blownfilmmachhineline #blownfilmmachineindia #blownfilmmachinemanufacturer #blownfilmmachineunit #blownfilmmachineexporter #blownfilmmachinemanufacturerandexporter #blownfilmmachineplant #blownfilmmachinemachinery #blownfilmmachinesupplier #blownfilmmachinerymanufacturerandexporter
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Three Layer Blown Film Making Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD, PP, HM, Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
Three Layer Blown Film Making Plant. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Three Layer Blown Film Making Plant are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Three Layer Blown Film Making Plant material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc.
Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of Three Layer Blown Film Making Plant:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Three Layer Blown Film Making Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Three Layer Blown Film Making Plant:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Multilayer Blown Film Machine.
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Three Layer Blown Film Making Plant
#threelayerblownfilmmakingplant #threelayerblownfilmmakingplantindia
#threelayerblownfilmmakingplantinahmedabad
#threelayerblownfilmmakingplantmanufacturer
#threelayerblownfilmmakingplantmachine
#threelayerblownfilmmakingplantline
#threelayerblownfilmmakingplantexporter
#threelayerblownfilmmakingplantmanufacturerandexporter
#threelayerblownfilmmakingplantunit
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Blowing Film Making Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD, PP, HM, Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
3 Layer Blowing Film Making Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
3 Layer Blowing Film Making Plant
Introduction of 3 Layer Blowing Film Making Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
3 Layer Blowing Film Making Plant
Application of 3 Layer Blowing Film Making Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for 3 Layer Blowing Film Making Plant:-
#3layerblowingfilmmakingplant #3 #layer #blowing #film #making #plant #3layer #layerblowing #blowingfilm #filmplant #3layerblowing #layerblowingfilm #filmmakingplant #3layerblowingfilm #layerblowingfilmmaking #blowingfilmmakingplant #3layerblowingfilmplant #3layerblowingfilmmakingplantindia #3layerblowingfilmmakingplantinahmedabad #3layerblowingfilmmakingplantmanufacturer #3layerblowingfilmmakingplantexporter #3layerblowingfilmmakingplantmachinery #3layerblowingfilmmakingplantmachine #3layerblowingfilmmakingplantline #3layerblowingfilmmakingplantunit #3layerblowingfilmmakingplantmanufacturerandexporter #3layerblowingfilmmakingplantmanufactureroceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Three Layer Blown Film Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD, PP, HM, Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
Three Layer Blown Film Making Machine. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Three Layer Blown Film Making Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Three Layer Blown Film Making Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc.
Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of Three Layer Blown Film Making Machine:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Three Layer Blown Film Making Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Three Layer Blown Film Making Machine:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Three Layer Blown Film Making Machine.
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Three Layer Blown Film Making Machine
#threelayerblownfilmmakingmachine
#threelayerblownfilmmakingmachineindia
#threelayerblownfilmmakingmachhineinahmedabad
#threelayerblownfilmmakingmachhinemanufacturer
#threelayerblownfilmmakingmachineexporter #threelayerblownfilmmakingmachineunit #threelayerblownfilmmakingmachineexporter #three #layer #blown #film #making #machine #threelayerblown #layerblownfilm #blownfilmmaking #filmmakingmachine #blownfilmmakingmachine
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Film Making Machinery
Product Brochure
| Brand | Ocean International |
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD, PP, HM, Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
3 Layer Film Making Machinery. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
3 Layer Film Making Machinery material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc.
Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of 3 Layer Film Making Machinery:-
Easy installation
Rugged design
Low maintenance cost.
Applications of 3 Layer Film Making Machinery:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of 3 Layer Film Making Machinery:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for 3 Layer Film Making Machinery.
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
3 Layer Film Making Machinery
#3layerfilmmakingmachinery #3layerfilmmakingmachineryindia #3layerfilmmakingmachineryinahmedabad #3layerfilmmakingmachinerymanufacturer
#3layerfilmmakingmachineryexporter #3layerfilmmakingmachinerymachine
#3layerfilmmakingmachineunit #3layerfilmmakingmachineexporter #3layerfilmmakingmachinemanufacturerandexporter
#3layer #layer #film #making #machine #layerfilm #filmmaking #makingmachine #3layerfilmmaking#filmmakingmachhine #3layerfilmmakingmachinemanufacturerindia
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Bowing Film Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Color | Blue,White,Gray |
| Voltage | 146 - 194 ( kw ) |
| Country of Origin | Made in India |
3 Layer Bowing Film Making Machine
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Introduction:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. 3 Layer Bowing Film Making Machine Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
3 Layer Bowing Film Making Machine
Application of 3 Layer Bowing Film Making Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Monolayer Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
3 Layer Bowing Film Making Machine
Introduction of 3 Layer Bowing Film Making Machine:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Application of 3 Layer Bowing Film Making Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for 3 Layer Bowing Film Making Machine:-
#3layerblowingfilmmakingmachine #3layerblowingfilmmakingmachineindia #3layerblowingfilmmakingmachineinahmedabad #3layerblowingfilmmakingmachinemanufacturer
#3layerblowingfilmmakingmachineunit
#3layerblowingfilmmakingmachineexporter #3layerblowingfilmmakingmachinemanufacturerandexporter
#3layerblowingfilmmakingmachinemanufactureroceaninternational
#3layerblowingfilmmakingmachinemachinery
#3layerblowingfilmmakingmachineplant
#3layerblowingfilmmakingmachineline
#ocean #international #oceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Blowing Film Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD, PP, HM, Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
3 Layer Blowing Film Making Machine. The offered 3 Layer Blowing Film Making Machine is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
3 Layer Blowing Film Making Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc.
3 Layer Blowing Film Making Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of 3 Layer Blowing Film Making Machine:-
Easy installation
Rugged design
Low maintenance cost.
Applications of 3 Layer Blowing Film Making Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of 3 Layer Blowing Film Making Machine:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Multilayer Blown Film Machine.
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
3 Layer Blowing Film Making Machine
#3layerblowingfilmmakingmachine #3layerblowingfilmmakingmachineindia #3layerblowingfilmmakingmachineinahmedabad #3layerblowingfilmmakingmachinemanufacturer #3layerblowingfilmmakingmachineunit #3layerblowingfilmmakingmachineexporter #3layerblowingfilmmachine #3layerblowingfilmmakkingmachhinesupplier #3layerblowingfilmmakingmachinemanufacturerandexporter
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Bowing Film Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Color | Blue,White,Gray |
| Voltage | 146 - 194 ( kw ) |
| Country of Origin | Made in India |
3 Layer Bowing Film Making Machine. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
3 Layer Bowing Film Making Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. 3 Layer Bowing Film Making Machine can also be produced with this machine.
Features of 3 Layer Bowing Film Making Machine:-
Easy installation
Rugged design
Low maintenance cost.
Applications of 3 Layer Bowing Film Making Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of 3 Layer Bowing Film Making Machine:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Multilayer Blown Film Machine.
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Film Making Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD, PP, HM, Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
Monolayer Blown Film Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
Introduction:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
Application:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Multilayer Blown Film Machinery
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Color | Blue,White,Gray |
| Voltage | 146 - 194 ( kw ) |
| Country of Origin | Made in India |
Multilayer Blown Film Machinery. The offered blown film plant is used for making the plastic film or sheet. This Multilayer Blown Film Machinery is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Multilayer Blown Film Machinery material is comparatively strong than two layer and Multilayer Blown Film Machinery. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machinery can also be produced with this machine.
Features of Multilayer Blown Film Machinery:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Multilayer Blown Film Machinery:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Multilayer Blown Film Machinery:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
Multilayer Blown Film Machinery
#multilayerblownfilmmachinery #multilayer #blown #film #machinery #multilayerblown #blownfilm #filmmachinery #multilayerblownfilm #blownfilmmachinery #multilayerblownfilmmachineryindia #multilayerblownfilmmachineryinahmedabad #multilayerblownfilmmachinerymanufacturer
#multilayerblownfilmmachineryexporter #multilayerblownfilmmachinerysupplier #multilayerblownfilmmachinerymachine
#multilayerblownfilmmachineryplant #multilayerblownfilmmachineryline
#multilayerblownfilmmachhinerymanufacturerandexporter
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Bowing Film Making Plant
Minimum Order Quantity: 1 Piece
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Color | Blue,White,Gray |
| Voltage | 146 - 194 ( kw ) |
| Country of Origin | Made in India |
3 Layer Blowing Film Making Plant
This Project Based on the Combination of LLD/ LDPE/ LLDPE Layer which Produces the Heavy Duty Bags
3 Layer Blowing Film Making Plant
Introduction of 3 Layer Blowing Film Making Plant:-
Blown Film is the Most Widely Used Plastic Extrusion Method is the Packaging Industry for Manufacturing Single Layer Film Structure. A Large Number of Machines are Also Available for Multi-Layer Film Structure. Monolayer Blown Film Plants Can be Used to Manufacture Polymer Films Using a Diverse Range of Polymers Like PP, LD, LLD, HM, LLDPE, LDPE, HDPE, etc.
3 Layer Blowing Film Making Plant
Application of 3 Layer Blowing Film Making Plant:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination Film for Aluminum Foil, Jute Paper and Board
Liner for Woven Sacks, Can and other Industrial Needs
Refuse Bags, Diaper Films, Packaging of Dairy Products
Green House Films, Packaging of Frozen Foods
Bags and Pouches for Fruits, Vegetable, Groceries, Refuse Bags etc.
Wrappers for Food Products, Laundry
Heat Sealed Sterilized Packages for Surgical Instruments
Health Care packaging
Garment Bags and Fresh Producing Packaging
Courier Bags
Keyword for 3 Layer Blowing Film Making Plant:-
#3layerblowingfilmmakingplant #3 #layer #blowing #film #making #plant #3layer #layerblowing #blowingfilm #filmplant #3layerblowing #layerblowingfilm #filmmakingplant #3layerblowingfilm #layerblowingfilmmaking #blowingfilmmakingplant #3layerblowingfilmplant #3layerblowingfilmmakingplantindia #3layerblowingfilmmakingplantinahmedabad #3layerblowingfilmmakingplantmanufacturer #3layerblowingfilmmakingplantexporter #3layerblowingfilmmakingplantmachinery #3layerblowingfilmmakingplantmachine #3layerblowingfilmmakingplantline #3layerblowingfilmmakingplantunit #3layerblowingfilmmakingplantmanufacturerandexporter #3layerblowingfilmmakingplantmanufactureroceaninternational
Extrusions Machinery
#extrusionsmachinery #extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Multilayer Blown Film Machinery
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Color | Blue,White,Gray |
| Voltage | 146 - 194 ( kw ) |
| Country of Origin | Made in India |
Multilayer Blown Film Machinery. The offered blown film plant is used for making the plastic film or sheet. This Multilayer Blown Film Machinery is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. Multilayer Blown Film Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
Multilayer Blown Film Machinery material is comparatively strong than two layer and Multilayer Blown Film Machinery. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machinery can also be produced with this machine.
Features of Multilayer Blown Film Machinery:-
Easy installation
Rugged design
Low maintenance cost.
Applications of Multilayer Blown Film Machinery:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of Multilayer Blown Film Machinery:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for Multilayer Blown Film Machine.
Multilayer Blown Film Machinery
#multilayerblownfilmmachinery #multilayer #blown #film #machinery #multilayerblown #blownfilm #filmmachinery #multilayerblownfilm #blownfilmmachinery #multilayerblownfilmmachineryindia #multilayerblownfilmmachineryinahmedabad #multilayerblownfilmmachinerymanufacturer #multilayerblownfilmmachineryexporter
#multilayerblownfilmmachinerymachine #multilayerblownfilmmachineryplant
#multilayerblownfilmmachineryline
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
3 Layer Film Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Brand | Ocean International |
| Power Consumption | 146 - 194 ( kw ) |
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Source | Electric |
| Material | LD, PP, HM, Biodegradable |
| Automation Grade | Automatic |
| Lay Flat Width Range | 600 - 1250 to 1400 - 2100 ( mm ) |
| Voltage | 146 - 194 ( kw ) |
| Size | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
| Layer | Three Layer |
| I Deal In | New Only |
| Country of Origin | Made in India |
3 Layer Film Making Machine. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technology in synchronization with set standard. Offered blown film plant is examined under the direction of professionals to ensure the flawlessness. 3 Layer Film Making Machine are used for varied crucial application in flexible packaging, which demand vital film properties like dart impact strength, puncture resistance, hot tack strength, gloss, oxygen and moisture barrier etc.
3 Layer Film Making Machine material is comparatively strong than two layer and mono layer blown films. It has strong impact in packaging industry as this product bears multiple protection properties including puncture and heat resistant, less or zero attraction to moisture and oxygen, etc. Multilayer Blown Film Machine is suitable for producing high barrier wrapping and stuffing material for packing food products, processed fluid consistency food items, etc. Multilayer Blown Film Machine can also be produced with this machine.
Features of 3 Layer Film Making Machine:-
Easy installation
Rugged design
Low maintenance cost.
Applications of 3 Layer Film Making Machine:-
Shopping Bags, Grocery Bags, T-Shirt Bags
Liners & Lamination film for aluminum foil, jute paper and board
Liner for woven sacks, Cans and other industrial needs
Refuse Bags, diaper films, packaging of dairy products
Construction Roofing sheet, Green House films
Packaging of frozen foods
Wrappers for food products, laundry and Garbage bag
Heat Sealed sterilized packages for surgical instruments
Health care packaging
Garment Bags and fresh producing packaging
Courier bags
Other Details of 3 Layer Film Making Machine:-
Minimise the cost of raw material.
Combination of different raw material.
Oscillating take-off unit is equip for get uniformly thickness of the film.
Volumetric type dosing unit is equip for the present value of material control for more effective in each layer.
Latest designed automatic winder and equipping the tension control device, it could be controlled more precise in the winding.
This machine could be combined different characteristics of plastic raw material in the same work.
Oscillating take-off unit is driven by heavy duty gear transmission system.
The gear transmission which is well precision and good stability can make the film more uniform of the thickness.
Its rotational angle could be attained to 359.
It could be equipped the Web guiding system which could be controlled to get neat edge for film in the winding.
Auxiliary take off motor is driven by AC invertor drive with Motor and Gear transmission.
The tonsillitis is controlled by low friction cylinder.
The bubble film could be covered approach of circle with calibration Basket type of fixed ring.
We are the professional manufacturer and experience supplier for 3 Layer Film Making Machine.
3 Layer Film Making Machine
#3layerfilmmakingmachine #3layerfilmmakingmachineindia #3layerfilmmakingmachineinahmedabad #3layerfilmmakingmachinemanufacturer #3layerfilmmakingmachineexporter #3layerfilmmakingmachineunit #3layerfilmmakingmachinemanufacturerandexporter #3layerfilmmakingmachinesupplier #3layer #layerfilm #filmmaking #makingmachine #layer #film #making #machine #3layerfilmmaking #filmmakingmachine #3layerfilmmakingmachinemannufacturerindia
Ocean International
ExtrusionsMachinery
#extrusionsmachinery
#extrusions #machinery
Additional Information:
- Production Capacity: 150 - 300 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Blowing Film Machinery
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 150 - 300 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Blowing Film Machinery. The offered blown film plant is used for making the plastic film or sheet. This blown film plant is manufactured by optimum grade raw material and sophisticated technoloay in synchronization with set standard. Offered blown film plant is examined under the direction of profession