Nikol, Ahmedabad, Gujarat
GST No. 24AAEFO6278J1ZX
Call 08048976753 76% Response Rate
Advantages ofTwolayer Blown Film Machine :-
Twolayer Blown Film Machinehas a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.
Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.
Applications ofTwolayer Blown Film Machine:-
Consumer food wrap from plastic wrap article.
Agricultural film
Bags
Industry packaging, shrink film , stretch film
Consumer packaging, food wrap, transport packaging ( Figure )
Laminating film
Barrier film
Multilayer film
Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and nanowire films.
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | OCEAN INTERNATIONAL |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 48 - 75 ( kw ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H ) |
Capacity | 55 - 125 ( kg/hr ) |
Driven Type | Electrical |
Lay Flat Width | 750 - 1200 ( mm ) |
Voltage | 48 - 75 ( kw ) |
Color | BLUE / WHITE |
Plastic Processed | EXTRUDER |
Maintenance | No Maintenance |
Co - Extrusion Blown Film Machine
Co - Extrusion Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Co - Extrusion Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Co - Extrusion Blown Film Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Co - Extrusion Blown Film Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | OCEAN INTERNATIONAL |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 48 - 75 ( kw ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H ) |
Color | BLUE / WHITE |
Power Source | Electric |
Voltage | 48 - 75 ( kw ) |
Material | LD/ PP/ HM/ Biodegradable |
Automation Grade | Automatic |
Plastic Processed | EXTRUDER |
Lay Flat Width Range | 750 - 1200 ( mm ) |
Maintenance | No Maintenance |
Film Thickness | 20 - 100 ( Micron ) |
Screw Diameter | 45 - 65 ( mm ) |
Layer | Twolayer |
Blown Film Machine
Blown Film Machine
with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment. Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | Ocean International |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 48 - 75 ( kw ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H ) |
Capacity | 55 - 125 ( kg/hr ) |
Material | Plastic |
Die Size | Automatic |
Driven Type | Electrical |
Lay Flat Width | 750 - 1200 ( mm ) |
Power Source | Electric |
Color | BLUE / WHITE |
Plastic Processed | EXTRUDER |
Automation Grade | Automatic |
Maintenance | No Maintenance |
Lay Flat Width Range | 600 - 1250 to 11400 - 2100 ( mm ) |
Voltage | 48 - 75 ( kw ) |
Film Thickness | 20 - 100 ( Micron ) |
Range Of Thickness Of Wall Ceiling Panels | 20 - 100 ( Micron ) |
Screw Diameter | 45 - 65 ( mm ) |
Layer | Twolayer |
I deal in | New Only |
Twolayer Blown Film Plant
Twolayer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Two layer ABA Die blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Twolayer Blown Film Plant in India:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | OCEAN INTERNATIONAL |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 48 - 75 ( kw ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H )' |
Power Source | Electric |
Color | BLUE / WHITE |
Material | LD,PP,HM,Biodegradable |
Automation Grade | Automatic |
Plastic Processed | EXTRUDER |
Lay Flat Width Range | 750 - 1200 ( mm ) |
Maintenance | No Maintenance |
Voltage | 48 - 75 ( kw ) |
Film Thickness | 20 - 100 ( Micron ) |
Screw Diameter | 45 - 65 ( mm) |
Size | 25 X 20 X 16 X 30 X 25 X 24 ( L X W X H ) |
I deal in | New Only |
Two Layer Blown Film Machine
Two Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment. Two layer blown film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two Layer Blown Film Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | OCEAN INTERNATIONAL |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 45 - 65 ( mm ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X h ) |
Capacity | 55 - 125 ( kg/hr ) |
Driven Type | Electrical |
Lay Flat Width | 750 - 1200 ( mm ) |
Voltage | 48 - 75 ( kw ) |
Color | BLUE / WHITE |
Plastic Processed | EXTRUDER |
Maintenance | No Maintenance |
Two Layer Blown Film Plant
Two Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Two Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two Layer Blown Film Plant is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Applications of Two Layer Blown Film Plant:
· Film for Shopping Bags
· Film for Liners
· Stretch Film
· Shrink Film
· Lamination Film
· Biodegradable Film
Two Layer Blown Film Plant with the best combination of technology and performance.
These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment. Twolayer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it.
Two Layer Blown Film Plant is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc.
It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be
produced from this single plant.
Two Layer Blown Film Plant
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Type | Automatic |
Brand | Ocean International |
Material to be Extruded | Plastic |
Capacity | 150 - 300 ( kg/hr ) |
Machine Type | Automatic |
Dimensions | 25 x 20 X 16 to 30 X 25 X 24 ( L X W X H ) |
Production Capacity | 55 - 125 ( kg/hr ) |
Automatic Grade | Automatic |
Maintenance | No Maintenance |
Output | 55 - 125 ( kg/hr ) |
Machine Power | 48 - 75 ( kw ) |
Body Material | MS |
Phase | 3 |
Voltage | 48 - 75 ( kw ) |
Color | BLUE / WHITE |
Wire Diameter | Aluminium |
Thickness | 55 - 125 ( kg/hr ) |
Weight | 6 Ton |
Warranty | 1 Year |
Die Size | Automatic |
Driven Type | Automatic |
Installation Services | Yes |
Lay Flat Width | 750 - 1200 ( mm ) |
I deal in | New Only |
Plastic Processed | EXTRUDER |
Power Consumption | 48 - 75 ( kw ) |
Twolayer Blown Film Machine
Twolayer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Twolayer Blown Film Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Twolayer Blown Film Machine with the best combination of technology and performance.
These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment. Twolayer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it.
Two layer ABA Die Film Making Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc.
It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be
produced from this single plant.
Applications of Twolayer Blown Film Machine:
Film for Shopping Bags
Film for Liners Stretch
Film Shrink
Film Lamination
Film Biodegradable Film
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Type | Automatic |
Brand | Ocean International |
Material to be Extruded | Plastic |
Capacity | 150 - 300 ( kg/hr ) |
Machine Type | Automatic |
Dimensions | 16 X 10 X 12 to 18 X 10 X 14 ( L X W X H ) |
Production Capacity | 150 - 300 ( kg/hr ) |
Automatic Grade | Automatic |
Maintenance | No Maintenance |
Output | 150 - 300 ( kg/hr ) |
Machine Power | 146 - 194 ( kw ) |
Body Material | MS |
Phase | 3 |
Voltage | 146 - 194 ( kw ) |
Color | BLUE / WHITE |
Thickness | 20 - 150 ( Micron ) |
Weight | 12 Ton |
Warranty | 1 Year |
Die Size | Automatic |
Driven Type | Automatic |
Installation Services | Yes |
Lay Flat Width | 600 - 1250 to 1400 - 2100 ( mm ) |
I deal in | New Only |
Plastic Processed | EXTRUDER |
Power Consumption | 146 - 194 ( kw ) |
Twolayer Blown Film Machine
Twolayer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment. Twolayer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | OCEAN INTERNATIONAL |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 48 - 75 ( kw ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H ) |
Voltage | 48 - 75 ( kw ) |
Power Source | Electric |
Color | BLUE / WHITE |
Material | LD,PP,HM,BIODEGRADABLE |
Automation Grade | Automatic |
Plastic Processed | EXTRUDER |
Lay Flat Width Range | 750 - 1200 ( mm ) |
Maintenance | No Maintenance |
Film Thickness | 20 - 100 ( Micron ) |
Screw Diameter | 45 - 65 ( mm ) |
Layer | Twolayer |
Two Layer Blown Film Making Machine
Two Layer Blown Film Making Machine
with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment. Two Layer Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | Ocean International |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 48 - 75 ( kw ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H ) [ Feet ] |
Capacity | 55 - 125 ( kg/hr ) |
Driven Type | Electrical |
Lay Flat Width | 750 - 1200 ( mm ) |
Voltage | 48 - 75 ( kw ) |
Color | Blue / White |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Twolayer Blown Film Machine
We are a leading Manufacturer & Twolayer Blown Film Machine such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process.
Coating of Twolayer Blown Film Machine:-
The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a rubber covered pressure roller and a chrome plated cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.
Application of Twolayer Blown Film Machine:-
Paper coating and laminating
Flexible packaging
Board coating and laminating
Fabric scbrim and non-woven
Laminating of Twolayer Blown Film Machine:-
Twolayer Blown Film Machine is a similar process except that the extruded hot molten resin acts as the bonding medium to a second web of material.
Applications of Twolayer Blown Film Machine:-
Twolayer Blown Film Machine are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.
Twolayer Blown Film Machine deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.
Process description of Twolayer Blown Film Machine:-
In the extrusion coating process an extruder forces melted thermoplastic resin through a horizontal slot-die onto a moving web of substrate. The resulting product is a permanently coated web structure. Extrusion lamination is a similar process to extrusion coating, where the resin is extruded between two substrates and acts as a bonding agent.
Inside an extrusion coating and laminating line the substrates and melt are nipped at a bonding station. This consists of a large roll, a pressure roll, and a counter-pressure roll cooled by water. The combination of the pressure between the rolls and the temperature permits delivery of the correct adhesion level.
The final product is rewound as a permanently bonded multi-ply laminated structure. Most plastic films and foils require a primer coating before they are used in the extrusion process.
Twolayer Blown Film Machine
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Capacity | 55 - 125 ( kg/hr ) |
Brand | OCEAN INTERNATIONAL |
Phase | Three Phase |
Color | Blue / White |
Dimension Lxwxh | 25 X 20 X 6 to 30 X 25 X 24 ( L X W X H ) |
Total Connected Load Hp Approx | 48 - 75 ( kw ) |
Material | LD,PP,HM,BIODEGRADABLE |
Two Layer Blown Film Extrusion Machine
Two Layer Blown Film Extrusion Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Two Layer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Two Layer Blown Film Extrusion Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Brand | Ocean International |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Consumption | 48 - 75 ( kw ) |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H ) [ Feet ] |
Color | Blue / White |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Blown Film Plant
We are a leading Manufacturer & Exporter of Blown Film Plant such as Extrusion Coating Lamination Machine, BOPP La Extrusion coating & laminating process.
Coating of Blown Film Plant:-
The actual process of extrusion coating involves extruding resin from a slot die at temperatures up to 320°C directly onto the moving web which may then passed through a nip consisting of a rubber covered pressure roller and a chrome plated cooling roll. The latter cools the molten film back into the solid state and also imparts the desired finish to the plastic surface. The web is normally run much faster than the speed at which the resin is extruded from the die, creating a coating thickness which is in proportion to the speed ratio and the slot gap.
Application of Blown Film Plant:-
Paper coating and laminating
Flexible packaging
Board coating and laminating
Fabric scbrim and non-woven
Laminating of Blown Film Plant:-
Blown Film Plant is a similar process except that the extruded hot molten resin acts as the bonding medium to a second web of material.
Applications of Blown Film Plant:-
Blown Film Plant are usually custom-built and can be configured for a variety of applications including liquid packaging, aseptic drink containers, flexible packaging, toothpaste tubes, medical packaging, industrial wraps, insulation backed materials, and plastic coated tablecloths, as well as sacks for products as diverse as cement, cereal grain, and dry chemicals.
Blown Film Plant deliver a combined substrate, the component elements of which would be very difficult to separate. The combined substrate inherits highly enhanced physical properties and barrier protection performance from its component elements.
Process description of Blown Film Plant:-
In the Blown Film Plant process an extruder forces melted thermoplastic resin through a horizontal slot-die onto a moving web of substrate. The resulting product is a permanently coated web structure. Extrusion lamination is a similar process to extrusion coating, where the resin is extruded between two substrates and acts as a bonding agent.
Inside an Blown Film Plant the substrates and melt are nipped at a bonding station. This consists of a large roll, a pressure roll, and a counter-pressure roll cooled by water. The combination of the pressure between the rolls and the temperature permits delivery of the correct adhesion level.
The final product is rewound as a permanently bonded multi-ply laminated structure. Most plastic films and foils require a primer coating before they are used in the extrusion process.
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Type | Automatic |
Brand | OCEAN INTERNATIONAL |
Material to be Extruded | Plastic |
Capacity | 55 - 125 ( kg/hr ) |
Machine Type | Automatic |
Dimensions | 25 X 20 X 16 to 30 X 25 X 24 ( L X W X H ) |
Production Capacity | 55 - 125 ( kg/hr ) |
Power Source | Electric |
Material | LD/ PP/ HM/ Biodegradable |
Automatic Grade | Automatic |
Lay Flat Width Range | 750 - 1200 ( mm ) |
Maintenance | No Maintenance |
Output | 55 - 125 ( kg/hr ) |
Machine Power | 48 - 75 ( kw ) |
Body Material | MS |
Phase | 3 |
Voltage | 48 - 75 ( kw ) |
Color | BLUE / WHITE |
Thickness | 20 - 100 ( Micron ) |
Weight | 6 Ton |
Warranty | 1 Year |
Range Of Thickness Of Wall Ceiling Panels | 20 - 100 ( Micron ) |
Film Thickness | 20 - 100 ( Micron ) |
Driven Type | Automatic |
Installation Services | Yes |
Layer | Twolayer |
I deal in | New Only |
Plastic Processed | EXTRUDER |
Power Consumption | 48 - 75 ( kw ) |
Two Layer Extrusion Blown Film Machine
Two Layer Extrusion Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Two Layer Extrusion Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two Layer Extrusion Blown Film Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Two Layer Extrusion Blown Film Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Type | Fully Automatic |
Brand | Ocean International |
Capacity | 55 - 125 ( kg/hr ) |
Machine Type | Two Layer Blown Film Making Machine |
Automation Grade | Automatic |
Machine Power | 48 - 75 ( kw ) |
Body Material | MS |
Voltage | 48 - 75 ( kw ) |
Warranty | 1 Year |
Size | 25 X 20 X 6 to 30 X 25 X 24 ( L X W X H ) |
Driven Type | Automatic |
Installation Services | Yes |
I Deal In | New Only |
Country of Origin | Made in India |
Extrusion Two Layer Blown Film Plant
Extrusion Two Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion Two Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Extrusion Two Layer Blown Film Plant is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion Two Layer Blown Film Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Layer Blown Film Making Machine
2 Layer Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Layer Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Layer Blown Film Making Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Layer Blown Film Making Plant
2 Layer Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Layer Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Layer Blown Film Making Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Layer Blown Film Making Line
2 Layer Blown Film Making Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Layer Blown Film Making Line has a great demand in global market for its wide range of packaging products that can be produced from it. 2 Layer Blown Film Making Line is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Layer Blown Film Making Line:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Extruder Two Layer Blown Film Making Plant
2 Extruder Two Layer Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Two Layer Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Two Layer Blown Film Making Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Extruder Two Layer Blown Film Making Line
2 Extruder Two Layer Blown Film Making Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Two Layer Blown Film Making Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Two Layer Blown Film Making Line:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Country of Origin | Made in India |
2 Extruder Blowing Film Machine
2 Extruder Blowing Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Blowing Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Blowing Film Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Extruder Blowing Film Plant
2 Extruder Blowing Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Blowing Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. 2 Extruder Blowing Film Plant is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Blowing Film Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Extruder Blowing Film Machine
2 Extruder Blowing Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Blowing Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. 2 Extruder Blowing Film Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Blowing Film Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Extruder Blowing Film Plant
2 Extruder Blowing Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Blowing Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. 2 Extruder Blowing Film Plant is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Blowing Film Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
2 Extruder Blowing Film Line
2 Extruder Blowing Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Blowing Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. 2 Extruder Blowing Film Line is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Blowing Film Line:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
LD Blown Film Making Machine
LD Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LD Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. LD Blown Film Making Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LD Blown Film Making Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
LD Blown Film Making Line
LD Blown Film Making Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. LD Blown Film Making Line is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LD Blown Film Making Line:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
LD Blown Film Machine in India
LD Blown Film Machine in India with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LD Blown Film Machine in India has a great demand in global market for its wide range of packaging products that can be produced from it. LD Blown Film Machine in India is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LD Blown Film Machine in India:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
LD Blown Film Plant in India
LD Blown Film Plant in India with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LD Blown Film Plant in India has a great demand in global market for its wide range of packaging products that can be produced from it. LD Blown Film Plant in India is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LD Blown Film Plant in India:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
LD Blown Film Line in India
LD Blown Film Line in India with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LD Blown Film Line in India has a great demand in global market for its wide range of packaging products that can be produced from it. LD Blown Film Line in India is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LD Blown Film Line in India:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
HM 2 Layer Blown Film Machine
HM 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
HM 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of HM 2 Layer Blown Film Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
HM 2 Layer Blown Film Plant
HM 2 Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
HM 2 Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. HM 2 Layer Blown Film Plant is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of HM 2 Layer Blown Film Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
HM 2 Layer Blown Film Line
HM 2 Layer Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
HM 2 Layer Blown Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, HM 2 Layer Blown Film Line materials can also be produced from this single plant.
Technical Specification of HM 2 Layer Blown Film Line:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Biodegradable 2 Layer Blown Film Making Machine
Biodegradable 2 Layer Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Biodegradable 2 Layer Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Biodegradable 2 Layer Blown Film Making Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Biodegradable 2 Layer Blown Film Making Plant
Biodegradable 2 Layer Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Biodegradable 2 Layer Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Biodegradable 2 Layer Blown Film Making Plant is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Biodegradable 2 Layer Blown Film Making Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Biodegradable 2 Layer Blown Film Making Line
Biodegradable 2 Layer Blown Film Making Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Biodegradable 2 Layer Blown Film Making Line has a great demand in global market for its wide range of packaging products that can be produced from it. Biodegradable 2 Layer Blown Film Making Line is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Biodegradable 2 Layer Blown Film Making Line:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Biodegradable 2 Layer Blown Film Machine
Biodegradable 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Biodegradable 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Biodegradable 2 Layer Blown Film Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Biodegradable 2 Layer Blown Film Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Biodegradable 2 Layer Blown Film Plant in India
Biodegradable 2 Layer Blown Film Plant in India with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Biodegradable 2 Layer Blown Film Plant in India has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Biodegradable 2 Layer Blown Film Plant in India:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Biodegradable 2 Layer Blown Film Line in India
Biodegradable 2 Layer Blown Film Line in India with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Biodegradable 2 Layer Blown Film Line in India has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Biodegradable 2 Layer Blown Film Line in India:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Automatic 2 Layer Blown Film Making Machine
Automatic 2 Layer Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Automatic 2 Layer Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Automatic 2 Layer Blown Film Making Machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Automatic 2 Layer Blown Film Making Machine:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Automatic 2 Layer Blown Film Making Plant
Automatic 2 Layer Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Automatic 2 Layer Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Automatic 2 Layer Blown Film Making Plant:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details
Minimum Order Quantity: 1 Unit
Product Brochure
Production Capacity | 28 - 280 ( kg/hr ) |
Power Consumption | 146 - 194 ( kw ) |
Plastic Processed | Extruder |
Maintenance | No Maintenance |
Brand | Ocean International |
Country of Origin | Made in India |
Automatic 2 Layer Blown Film Making Line
Automatic 2 Layer Blown Film Making Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Automatic 2 Layer Blown Film Making Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Automatic 2 Layer Blown Film Making Line:
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
View Complete details