Ocean International
Nikol, Ahmedabad, Gujarat
GST No. 24AAEFO6278J1ZX
Call 08048976753 80% Response Rate
Two Layer Blown Film Plant
Twolayer Blown Film Machinehas a better balance of mechanical properties than cast or extruded films because it is drawn in both the transverse and machine directions. Mechanical properties of the thin film include tensile and flexural strength, and toughness. The nearly uniform properties in both directions allow for maximum toughness in the film.
Blown film extrusion can be used to make one large film, two smaller ones, or tubes that can be made into bags. Also, one die can make many different widths and sizes without significant trimming. This high level of flexibility in the process leads to less scrap material and higher productivity. Blown films also require lower melting temperatures than cast extrusion. Measured at the die opening, the temperature of cast film is about 220°C., where as the temperature of blown film is about 135°C. Furthermore, the cost of the equipment is approximately 50% of a line.
Applications ofTwolayer Blown Film Machine:-
Consumer food wrap from plastic wrap article.
Agricultural film
Bags
Industry packaging, shrink film , stretch film
Consumer packaging, food wrap, transport packaging ( Figure )
Laminating film
Barrier film
Multilayer film
Research has been done to explore the incorporation of blown film extrusion into the large-scale manufacturing of carbon nanotube and nanowire films.
Two Layer Blown Film PlantTwo Layer Blown Film Plant IndiaTwo Layer Blown Film Plant ManufacturerTwo Layer Blown Film MachineTwo Layer Blown Film LineTwo Layer Blown Film Plant UnitTwo Layer Blown Film Plant ExporterTwo Layer Blown Film Plant Manufacturer and ExporterTwo Layer Blown Film Plant Manufacturer Ocean International#Two #Layer #Blown #Film #Plant
LD Blown Film Making Plant
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
LD Blown Film Making Plant
LD Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LD Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LD Blown Film Making Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
2 Extruder Blowing Film Line
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
2 Extruder Blowing Film Line
2 Extruder Blowing Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Blowing Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Blowing Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
2 Extruder Two Layer Blown Film Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
2 Extruder Two Layer Blown Film Making Machine
2 Extruder Two Layer Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
2 Extruder Two Layer Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of 2 Extruder Two Layer Blown Film Making Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
LDPE 2 Layer Blown Film Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
LDPE 2 Layer Blown Film Machine
LDPE 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LDPE 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LDPE 2 Layer Blown Film Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
LDPE 2 Layer Blown Film Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
LDPE 2 Layer Blown Film Line
LDPE 2 Layer Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LDPE 2 Layer Blown Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. LDPE 2 Layer Blown Film Line is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LDPE 2 Layer Blown Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
LDPE 2 Layer Blown Film Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Brand | Ocean International |
| Country of Origin | Made in India |
LDPE 2 Layer Blown Film Plant
LDPE 2 Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LDPE 2 Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LDPE 2 Layer Blown Film Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
LDPE 2 Layer Blown Film Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
LDPE 2 Layer Blown Film Machinery
LDPE 2 Layer Blown Film Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
LDPE 2 Layer Blown Film Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. LDPE 2 Layer Blown Film Machinery is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of LDPE 2 Layer Blown Film Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
HDPE 2 Layer Blown Film Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
HDPE 2 Layer Blown Film Machinery
HDPE 2 Layer Blown Film Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
HDPE 2 Layer Blown Film Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. HDPE 2 Layer Blown Film Machinery is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of HDPE 2 Layer Blown Film Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
HDPE 2 Layer Blown Film Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
HDPE 2 Layer Blown Film Line
HDPE 2 Layer Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Twolayer Blown Film Extrusion Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of HDPE 2 Layer Blown Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
HDPE 2 Layer Blown Film Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
HDPE 2 Layer Blown Film Plant
HDPE 2 Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
HDPE 2 Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of HDPE 2 Layer Blown Film Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
HDPE 2 Layer Blown Film Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
HDPE 2 Layer Blown Film Machine
HDPE 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
HDPE 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of HDPE 2 Layer Blown Film Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
High Speed 2 Layer Blown Film Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
High Speed 2 Layer Blown Film Machine
High Speed 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
High Speed 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of High Speed 2 Layer Blown Film Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
High Speed 2 Layer Blown Film Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
High Speed 2 Layer Blown Film Plant
High Speed 2 Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
High Speed 2 Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of High Speed 2 Layer Blown Film Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
High Speed 2 Layer Blown Film Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
High Speed 2 Layer Blown Film Line
High Speed 2 Layer Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
High Speed 2 Layer Blown Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of High Speed 2 Layer Blown Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
High Speed 2 Layer Blown Film Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
High Speed 2 Layer Blown Film Machinery
High Speed 2 Layer Blown Film Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
High Speed 2 Layer Blown Film Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of High Speed 2 Layer Blown Film Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Automatic 2 Layer Blown Film Making Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Automatic 2 Layer Blown Film Making Machine
Automatic 2 Layer Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Automatic 2 Layer Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Automatic 2 Layer Blown Film Making Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Automatic 2 Layer Blown Film Making Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Automatic 2 Layer Blown Film Making Plant
Automatic 2 Layer Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Automatic 2 Layer Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Automatic 2 Layer Blown Film Making Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Automatic 2 Layer Blown Film Making Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Automatic 2 Layer Blown Film Making Line
Automatic 2 Layer Blown Film Making Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Automatic 2 Layer Blown Film Making Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Automatic 2 Layer Blown Film Making Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Automatic 2 Layer Blown Film Making Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Automatic 2 Layer Blown Film Making Machinery
Automatic 2 Layer Blown Film Making Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Automatic 2 Layer Blown Film Making Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Automatic 2 Layer Blown Film Making Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Fully Automatic 2 Layer Blown Film Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Fully Automatic 2 Layer Blown Film Machine
Fully Automatic 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Fully Automatic 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Fully Automatic 2 Layer Blown Film Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Fully Automatic 2 Layer Blown Film Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Fully Automatic 2 Layer Blown Film Plant
Fully Automatic 2 Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Fully Automatic 2 Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Fully Automatic 2 Layer Blown Film Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Fully Automatic 2 Layer Blown Film Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Fully Automatic 2 Layer Blown Film Line
Fully Automatic 2 Layer Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Fully Automatic 2 Layer Blown Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Fully Automatic 2 Layer Blown Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Fully Automatic 2 Layer Blown Film Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Fully Automatic 2 Layer Blown Film Machinery
Fully Automatic 2 Layer Blown Film Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Fully Automatic 2 Layer Blown Film Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Fully Automatic 2 Layer Blown Film Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
In India 2 Layer Blown Film Making Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
In India 2 Layer Blown Film Making Machine
In India 2 Layer Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
In India 2 Layer Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of In India 2 Layer Blown Film Making Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
In India 2 Layer Blown Film Making Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Two layer Blown Film Extrusion Machine
In India 2 Layer Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
In India 2 Layer Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of In India 2 Layer Blown Film Making Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
In India 2 Layer Blown Film Making Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
In India 2 Layer Blown Film Making Line
In India 2 Layer Blown Film Making Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
In India 2 Layer Blown Film Making Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of In India 2 Layer Blown Film Making Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
In India 2 Layer Blown Film Making Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
In India 2 Layer Blown Film Making Machinery
In India 2 Layer Blown Film Making Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
In India 2 Layer Blown Film Making Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of In India 2 Layer Blown Film Making Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Machine
Extrusion 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Plant
Extrusion 2 Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Line
Extrusion 2 Layer Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Machinery
Extrusion 2 Layer Blown Film Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Machine
Extrusion 2 Layer Blown Film Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Plant
Extrusion 2 Layer Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Line
Extrusion 2 Layer Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Extrusion 2 Layer Blown Film Machinery
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Extrusion 2 Layer Blown Film Machinery
Extrusion 2 Layer Blown Film Machinery with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Extrusion 2 Layer Blown Film Machinery has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Extrusion 2 Layer Blown Film Machinery:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Co - Extrusion Blown Film Making Machine
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Co - Extrusion Blown Film Making Machine
Co - Extrusion Blown Film Making Machine with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Co - Extrusion Blown Film Making Machine has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to creatie moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Co - Extrusion Blown Film Making Machine:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Co - Extrusion Blown Film Making Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Co - Extrusion Blown Film Making Plant
Co - Extrusion Blown Film Making Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Co - Extrusion Blown Film Making Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Co - Extrusion Blown Film Making Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Co - Extrusion Blown Film Machine in India
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Co - Extrusion Blown Film Machine in India
Co - Extrusion Blown Film Machine in India with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Co - Extrusion Blown Film Machine in India has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Co - Extrusion Blown Film Machine in India:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Daya
View Complete details
Co - Extrusion Blown Film Plant
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Co - Extrusion Blown Film Plant
Co - Extrusion Blown Film Plant with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Co - Extrusion Blown Film Plant has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Co - Extrusion Blown Film Plant:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
Co - Extrusion Blown Film Line
Product Brochure
| Production Capacity | 28 - 280 ( kg/hr ) |
| Power Consumption | 146 - 194 ( kw ) |
| Plastic Processed | Extruder |
| Maintenance | No Maintenance |
| Brand | Ocean International |
| Country of Origin | Made in India |
Co - Extrusion Blown Film Line
Co - Extrusion Blown Film Line with the best combination of technology and performance. These low investment, power efficient, high - speed plants can give processors the competitive edge and quick return on their investment.
Co - Extrusion Blown Film Line has a great demand in global market for its wide range of packaging products that can be produced from it. Two layer ABA Die blown film machine is an economical solution to create moderate barrier films for shopping bags, crop covers, carry bags used in textile sector, etc. It consumers low power and when it comes to return on investment, packaging industry can made good and fast profit. Similarly, two layer blown film line materials can also be produced from this single plant.
Technical Specification of Co - Extrusion Blown Film Line:
|
Blown Film Line Plant Model |
Screw Size (mm) |
Screw L/D Ratio |
Feed Section Type |
Max LayFlat Width |
Thickness Range (Micron) |
Max Production Capacity |
Total Connected Load |
Blown Film Line - Dimension Of Plant |
||
|
(mm) |
(kg/hr) |
(KW) |
L |
W |
H |
|||||
|
OESCOBL 35-45 |
35-45 |
28:1 |
Smooth Feed |
750 |
20 to 100 |
55 |
48 |
25 |
20 |
16 |
|
OESCOBL 45-55 |
45-55 |
28:1 |
Smooth Feed |
900 |
20 to 100 |
80 |
58 |
30 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
28:1 |
Smooth Feed |
1200 |
20 to 100 |
120 |
65 |
35 |
23 |
20 |
|
OESCOBL 35-45 |
35-45 |
30:1 |
Groove Feed |
800 |
20 to 100 |
90 |
64 |
25 |
20 |
18 |
|
OESCOBL 55-65 |
55-65 |
30:1 |
Groove Feed |
1200 |
20 to 100 |
125 |
75 |
30 |
25 |
24 |
Additional Information:
- Production Capacity: 28 - 280 ( kg/hr )
- Delivery Time: 90 Working Days
View Complete details
EXPLORE MORE CATEGORIES